Antenna: Diversity Omni-directional Ceiling Mount

Ceiling-mount diversity indor antenna with RP-TNC connectors-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is omnidirectional and has a nominal gain of 2.2 dBi. Its low profile allows it to remain unnoticed in the ceiling. It comes with a clip that permits it to be mounted to a drop-ceiling cross member.

Antenna (2.4GHz, 2.2 DBI Dipole Antenna with RP-TNC Connector)

Single black dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency band. It has a 90-foot articulation radius. It can be used with all radios that utilize an RP-TNC antenna connector.

Omni-directional Indoor Ceiling Mount typically hung from crossbars of drop ceilings;

Comes with RP-TNC connector Ceiling-mount indoor antenna with RP-TNC connector. This antenna was designed for WLAN applications with frequencies of 2400-2500 MHz. The antenna is omni-directional and has a nominal gain of 5.2 dBi. It comes with a clip that allows it to be mounted to a drop-ceiling cross member.

Antenna: Indoor white Dipole Omni-directional Coverage

Single white dipole antenna with an RP-TNC connector. The antenna provides indoor omnidirectional coverage and is designed for use in the 2400-2500 MHz frequency band. It has a 90-foot articulation radius. It can be used with all radios that utilize an RP-TNC antenna connector.

Omni-directional Mast Mount; Outdoor short-range point-to-multipoint applications Comes with RP-TNC Connector)

Mast-mount indoor/outdoor antenna with a RP-TNC connector-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is omnidirectional and has a nominal gain of 5.2 dBi. It is designed to be mounted on a round mast.

Antenna: Diversity Omni-directional-Pillar Mount

Pillar-mount diversity, indoor antenna with two RP-TNC connectors-Cosmetic antenna is ideal for the retail or hospital environment. Includes 36 in. of white RG-58 cable with a separation of coaxial cables that are joined together to form a 10 in. length. Has a tan cloth covering in a 14 in. X 5 in. X1 in. rectangle. Included are two mounting brackets that will keep the antenna 6 in. off the wall.

Antenna ( 2.4 GHz High-gain omni-directional Mast Mount)

Mast mount outdoor high gain antenna with a RP-TNC connector-This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is omni-directional and has a nominal gain of 12 dbI. This design uses an elevated center-feed to produce an elevation pattern with very little "squint" or beam-tilt. It is designed to be mounted on a round mast.

Patch Antenna

Wall mount, indoor/outdoor directional patch antenna. Designed for use with any radio that features an RP-TNC antenna connector. For use in the 2400-2500 MHz frequency band. The pigtail cable is plenum rated, 36" long.

Diversity Patch Antenna

Wall-mount, indoor/outdoor antenna with two RP-TNC connectors-Similar to the above patch, but providing diversity antennas in the same package for areas where multipath problems exist. The pigtail cable is planum rated and 36" long.

Diversity Patch Antenna - Indoor/Outdoor, unobtrsive, longrnage antena (may also be used as a midrange bridge antenna)

Wall mount indoor/outdoor antenna with a RP-TNC connector - Designed for use with any radio that features a RP-TNC conector. For use in the 2400-2500 MHz frequency band. The plenum rated pigtail cable is 36" long.

Aironet Yagi Antenna

High-gain outdoor directional antenna with a RP-TNC connector-This WLAN antenna is a completely enclosed yagi. It is designed to be used as a bridge antenna between two networkes or for point-point communications. It has a nominal VSWR of 1.5:1 and is less than 2:1 over the entire frequency band. The gain is 10 dBi and the half-power beamwidth is 55 degrees. This antenna is normally mounted on a mast and is vertically polarized.

Yagi Mast Mount Antenna - Outdoor longrange directional connections

Indoor Omni-directional Antenna - Linear, Vertical; RP-SMA to TNC Adapter or Reverse SMA to TNC

 Increase the Range of Your Wireless Device; Works with Virtually Any 802.11 b/g Compliant Devices with a SMA or TNC Connector; Magnetic Base with Extension Cable and Mounting Kit for Flexible Placement

Omni-directional - Indoor Antenna

Indoor-only black dipole like omnidirectional antenna for 5 GHz. Used with the 802.11a radio (AIR-RM22A and the 1200 Series Access Point

Omni-directional - Indoor Antenna

Indoor-only white dipole like omnidirectional antenna for 5 GHz. Used with the 802.11a radio (AIR-RM22A) and the 1200 Series access point

Diversity Omni-directional-Indoor Only Antenna

Indoor-only diversity omnidirectional 5 GHz antenna for use with the 1200 Series Acess Points and the 802.11a module (AIR-RM22A).

Midrange Omni-directional Indoor/Outdoor w/RPC-TNC connector Antenna

Indoor or outdoor use omnidirectional 5 GHz antenna for use with the 1200 Series and the 802.11a module (AIR-RM22A). Can be mast or ceiling mounted.

Diversity Patch Wall Mount Antenna

Wall Mount diversity patch antenna with RP-TNC Connectors - Designed for use in both indoor and outdoor applications. It comes with wall mount hardware, and has a gain of 7 dBi. It has a plenum rated pigtail cable of 36 in.

Antenna: Patch Wall Indoor/Outdoor wall or articulating mast mount

Wall or Mast Mount Patch Antenna - Designed for use indoor or outdoors. This antenna comes with a wall mount and a plate that adapts to articulating mounting hardware (AIR-ACC2662), which is sold separately. It has a plenum rated pigtail cable of 36 in.

Omni-directional Antenna - Outdoor

A 7.5 dBi antenna which supports 4900-5825 MHz. It has a 12" pigtail cable and a N-type connector.

Omni-directional Antenna - Outdoor, direct mount on unit

A 5.5 dBi antenna for use in the 2400-2484 MHz frequency band which utilizes a N-type connector. This antenna directly mounts onto the unit, and has no cable attachments.

Antenna (5.8 GHz Omni-directional Mast Mount - Exclusively used for the CISCO Aironet Series 1400 Wireless Bridge

An omnidirectional antenna, for use with the Cisco Aironet 1400 Series Wireless Bridge. This non-diversity, vertically polarized antenna operates in the UNII-3 band (5725 to 5825 MHz). The antenna is designed to be mast mounted in an outdoor environment. The antenna is not compatible with other Cisco Aironet radio products operating in the 5 GHz frequency band.

Sector Antenna N-Male

A sector antenna for use with the CISCO Aironet 1400 Series Wireless Bridge. This ono-diversity symmetric annenna operates in the UNII-3 band (5725-5825 MHz). The antenna is designed to be mounted outdoors on a mast or a suitable vertical surface.  The antenna is not compatible with other CISCO Aironet radio products operating in the 5 GHz frequency band.

Antenna: Aironet Dish, N-Male - Vertical or Horizontal Field Configurable

A parabolic dish antenna for use with the CISCO Aironet 1400 Series Wireless Bridge. This non-diversity parabolic antenna operates in the UNII-3 band (5725-5825 MHz). The antenna is designed to be mounted outdoors on a mast.  The antenna is designed to be used at the hub or client site of a point-to-point installation, or point-to-multipoint client sites, providing extended range. The antenna is not compatible with other CISCO Aironet radio products operating in the 5 GHz frequency band.

Aironet Sector Antenna

Mast mount outdoor sector antenna with a RP-TNC connector - This antenna was designed for WLAN applications for frequencies of 2400-2500 MHz. The antenna is directional and has a nominal gain of 14 dBi. Its flexible mounting bracket allows for either mast or wall mounting options.

Diversity Patch Antenna

Antenna: Parabolic Dish

Very high-gain outdoor antenna with a RP-TNC connector-This WLAN antenna is a parabolic dish designed to be used as a bridge antenna between two networks or for pint-to-point communications. It consists of an aluminum parabolic reflector and feed antenna. The antenna features a rugged mount.  It also offers 20 degree fine adjustment for both horizontal and vertical planes. The antenna is provided with hardware for mast mounting