| SIRIT |
IN510 Fixed Reader Development Kit |
|
| Infinity 510 Ultra High Frequency 860 - 960 MHz High-Performance RFID Reader Evaluation Kit |
|
| Item: MTS-IN-200-001 |
|
Your Price Starting at: $3,100 |
| |
|
|
The INfinity 510 redefines the stare-of-the-art for RFID readers. This powerful UHF reader system is designed for enterprise class applications and features best-in-class air interface performance. The INfinity 510 was designed from the ground up to provide worldwide regulatory support from a single platform. The DK-510-1 RFID develpment kit is an easy to use, cost effective tool for evaluation the performance of the INfinity 510 Gen 2 reader in a lab or actual application environment. The kit contains all necessary components to create a fully functional RFID reader solution. With the DK-510-1, you will be able to install and configure a system and begin testing applicatioins within minutes.
|
Features & Benefits
|
|
|
- Frequency: UHF band, 902 - 928 MHz
- Supported Transponders: EPCglobal Class0, Writeable Class 00+, EPCglobal Class 1, EPCglobal UHF Generation 2
- Communications Protocol: Serial with CCITT CRC-16 error detection
- Communications Parameters: 115,200 bsp, 8 data bits, no parity, 1 stop bit
- Communications Signal Level: TTL level
- Interface Connector: 10 pin 2 mm Sullins PPPN052FFKP or equivalent
- Antenna Type: Integrated internall patch antenna; Optional: External 50 ohm antenna connection (MMCX)
- Upgradeable Firmware: Yes
- Dimensions (LxWxD): 97.8 x 67.3 x 26.9mm (3.85 x 2.65 x 1.06 in.) including integrated antenna
- Weight: With integrated antenna: 147.0 g (5.2 oz.); Without integrated antenna: 77.g (2.7 oz.)
- Mounting: 4 corner-mounted standoffs with #4-40 threads, male or female configuration
- Opeating Temperature: -20C to +70C (-4F to 158F)
- Power Requirements: Input Voltage: +5VDC +/- 5%
- Active Current: 1.5A peak
- Standby Current: 160 mA, Nominal
- Idle: < 1mA
- RF Output Power: 1 Watt (30 dBm) Adjustable
- Support of leading compliant UHF Class 0, Writable Class 0/0+, Class 1 tags and UHF Generation 2 tags; Reads/writes tags in any environment with a single component
- Single connection to serial interface and power supply; Provides an easy way to connect to existing devices.
- Firmware download facility via the serial interface; Permits forward compatibility to future protocols via upgrades.
- User adjustable output power up to 1 Watt (30 dBM); Allows optimum output for the application.
- Single our dual port antenna via MMCX connection; Delivers integration flexibility into new or existing equipment.
- Power Supply: 12VDC, 2A (unregulated)
- Specification: EPC Class 1
|
|
